The function and function of the calciner There are three main functions of the decomposition furnace: one is to make the fuel have sufficient burning time in the furnace, and the theoretical burning degree should reach 100%, so that the heat of the fuel can be released to the maximum. The second is to maximize the dispersity of the material through intense swirling and spouting, and to promote sufficient heat exchange with the hot gas in the dispersed and suspended state. The third is to promote the rapid decomposition of calcium carbonate, and the decomposition rate should reach more than 90%.Vacuum heat treatment of main and driven gears of automobile main reducer To achieve the above purpose, the dilute solid-phase gas flow in the decomposition furnace should have a relatively stable flow field, concentration field, temperature field and pressure field. The calciner has been developed and improved many times from its birth to today. There are various types of derivation and derivation, and there are 37 types in five categories. According to the movement form of air flow, it can be roughly divided into swirl-spray type, pre-combustion chamber-spout type, fluidized bed-spout type and suspension pipeline type. MIM Technology to make tiny parts Various types of calciners rely on "cyclone effect", "spray effect", "suspension effect" and "fluid effect", so that the dilute in-phase air flow can be highly dispersed in the furnace, increase the contact area between the material and the hot air flow, and prolong the material flow. The residence time in the decomposition furnace can improve the combustion efficiency, improve the heat exchange rate and improve the decomposition rate of the raw meal entering the kiln. There are more than two types of airflow movement in the decomposing furnaces used in daily life. However, from a macro perspective, the technical principles of various calciners are basically the same, and with the maturity of decomposition technology and the mutual penetration of technology, various precalciners have similar structural forms in process devices and calciners.Cermet and metal vacuum brazing